There are three options to mount Yirro-plus on a dental unit. It is nearly always possible to mount the system at the side of the delivery. In many situations it is possible to integrate in a free slot or on a tube of bracket or Cart.
Dedicated mounting adaptors have been developed for specific types of dental chairs. If you want to find out more about mounting options on your specific unit, check the options here: ‘choose your dental unit type’).
A UNI DOCKING
It is practically always possible to mount Yirro-plus® on a vertical surface at the side of the delivery unit. What is needed is some free space and a mounting surface of about 18×22 mm. Simply mount the Mobile docking onto the surface and clip the Uni Docking (universal docking) onto it. (Check the examples in the tab ‘choose your dental unit type’).
Mobile option: When you have external air connections on 2 chairs in 2 different rooms, a mobile option occurs: mount a Mobile docking holder on each unit’s delivery; by de-clipping the Universal docking to and from the Mobile docking holder it’s easy to transfer the system from 1 unit to another . Pay attention: this only applies to the COMFORT system (air-only).
B IN ‘FREE’ SLOT
The Standard Adaptor Docking is included in all start sets and can be used to integrate Yirro-plus® in the 15 mm slot of your A-Dec unit. For many other types of dental units, dedicated integration adaptors have been developed. (Check the examples in the tab ‘choose your dental unit type’).
C ON TUBE (ø13/ø22 mm)
In the situation of a unit with a bracket arm (swivel), often a ø22 mm diameter tube is used to attach the delivery. On a CART, the instruments are placed on a tube too (diameter ø13mm). A special mounting adaptor is available to mount the Yirro-plus docking onto these tubes. (Check the examples in the tab ‘choose your dental unit type’).
The CONNECTION of Yirro-plus is identical for any type of dental unit: the system is to be connected independently to 3-6 bar (45-90 psi) compressed air (COMFORT system) or to air/electricity (100-240VAC) (PREMIUM system).
Connection of the Yirro-plus® COMFORT system
The Yirro-plus® COMFORT system is to be connected to 3-6 bar compressed air. This can either be realized by use of the included T-part (left picture) or by use of one of the included quick couplings, plugged into an external air connection (right picture).
Two types of quick couplings are furnished (a NW 2.7 [EU] and a QD polymale 4mm connector [asia/US]).
Connection of the Yirro-plus® PREMIUM system
The Yirro-plus® PREMIUM system is to be connected to 3-6 bar (45-90 psi) air by use of the included T-part. The system is also to be connected to 100-240VAC electricity by use of an easy plug-in medical power adapter with universal exchangeable contact blades. The white air/power box should always be placed in the base of the dental unit – for a neat cabling – consequently only the connection hose is to be guided outside, just as the other hoses, all the way to the mounted docking. See below picture for an impression of this installation.
NOTE
Make sure you know where you prefer to place your docking station and to check the length of the connection hose from this point (standard length of the PREMIUM connection hose is 1.80 m – a special longer version of the PREMIUM connection hose is available – 2.60 m – on demand [Article 0781]).
INSTRUCT YOUR TECHNICIAN
We recommend you to instruct your technician to connect the PREMIUM system to electricity. An independent connection is applicable:
24 VDC
The system uses 24 VDC. In the start set, a Medical Power Adaptor is included that is to be connected directly to 100-240VAC and capable to convert this to 24VDC. You can use an empty socket – if there is no empty socket available, the included contra part with wires can be used. Instruct your technician to mount the contra part directly onto a (suitable) terminal block in the unit (100-240 Volt) and then the Power Adaptor can be mounted in the contra part.
Then, the small plug of the Power Adaptor needs to be mounted onto the Air/Power supply box of the Yirro-plus® PREMIUM system (white box).
HOSE MOUNTING
The connection hose is to be guided outside the dental base, to the docking station. Finally, the click contacts in the connection hose and at the bottom of the PREMIUM air-regulator need to be connected.
NOTE: Before you detach the connection hose cover ring, make sure the click contacts are rigidly mounted and also check if the air hose is rigidly fixed (push firmly) on the air inlet of the air-regulator.
