Once installed, the Yirro-plus® COMFORT start set provides all you need to start right away and work with 4 patients. Mirrors and handles are fully autoclavable.

You will find a practical cleaning box and sterilization caps included in the start set.

A Yirro-plus® COMFORT start set contains:

• 4 handles

• 4 mirrors (2×2 sizes)

• 1 regulator with manual ON/OFF toggle-switch / air coupling

• 1 docking station with universal docking / adaptor docking

• 1 cleaning box for protected cleaning of mirror heads

• 4 no-SPOT autoclave caps [for minimization of ‘solid spots’ on mirror surface]

• air connection supply [i.e. quick couplings:Q.D. coupling ø4mm/NW 2.7 and T-6mm

• 1 user manual & installation instruction

The COMFORT system is to be installed independently to the compressor air [3-6 bar]. All relevant connection supply is included in the start set.

Do you have an external air connection? Then it is extremely easy to install the system: you simply plug-in, hook-up and you are ready to go.

It is technically possible to transport the Yirro-plus® COMFORT system to another chair (in another room). Just make sure you can use external air connection points on both chairs and mount the system by use of the Universal Docking and the Mobile docking holder. Mount 1 Mobile docking holder on each delivery unit, and you can easily plug-in and off at both units ….

NOTE: Once a Yirro-docking has been slot-integrated, this mobile use is no longer an option.

If you have any further questions, see below FAQ-button. In case you want to check installation details, you can download the installation instruction from our downloadpage (see below DOWNLOAD-button).

The Yirro-plus® PREMIUM system is switched automatically: you take out the mirror from the docking station and automatically the air flow is switched ON. You can control the flow of the air by a turn knob. If you place back the mirror, the air flow automatically stops.

Once installed, the Yirro-plus® PREMIUM start set provides all you need to start right away and work with 4 patients. A practical cleaning box and sterilization caps are included in the start set. Mirrors and handles are fully autoclavable.

A Yirro-plus® PREMIUM start set contains:

• 4 handles and 4 mirrors (2×2 sizes)

• 1 regulator with automatic magnet-switch / air coupling

• 1 docking station with universal docking / adaptor docking

• 1 cleaning box for protected cleaning of mirror heads

• 4 no-SPOT autoclave caps for minimization of ‘solid spots’ on mirror surface

• power/air box + hose [connection to 24VDC]

• medical power supply EN 60601 [converts 90/240 Volt to 24 VDC]

• air connection supply

• 1 user manual & installation instruction

Yirro-plus® PREMIUM system is connected independently to electricity (90-230 Volt DC) and to 3-6 bar compressed air of your compressor. It is recommended that you instruct your technician to install the system, because the technician will know your unit and knows where to find the 90-230 Volt DC. The PREMIUM installation instruction can be downloaded below (see button DOWNLOADS). You could send it to your technician for a review. In normal situations, the connection should not take longer than 3/4 hour.

If you have any further questions, see below FAQ-button. In case you want to check installation details, you can download the installation instruction from our downloadpage (see below DOWNLOAD-button).

The PREMIUM system can be upgraded with an optional foot pedal, enabling you to switch OFF in between your treatment without having to place back the mirror. This is especially comfortable when working under microscope.

If you simply like to use the ultra bright, compact Yirro-plus mirrors and light weight ergonomic handles, but you do not (or not yet) wish to use the air flow option, you may consider purchase of the Yirro-plus PILOT 0-2 box.

A Pilot 0-2 box is equipped with 6 mirrors (3x no.0 and 3x no.2); 6 handles, 1 cleaning box and 6 no-SPOT autoclave caps.